2 to 5 rooms One outdoor unit, separate control in every room

Multi-Split Air Conditioning for Two to Five Rooms

Aircova fits multi-split air conditioning in homes across London and the South East, from £3,995 for two rooms, fitted with VAT included. One outdoor unit runs up to five indoor units, each with its own temperature, and the whole system heats your home in winter too.

  • F-Gas certified engineers
  • Fixed price with VAT, in writing
  • Two or three rooms fitted in 2 to 3 days

Prices last checked: October 2026

Cutaway illustration of a two-storey house where one outdoor unit feeds wall-mounted units in a bedroom, a study and the living room, each set to its own temperature
F-Gas certifiedQualified, registered engineers
Five leading brandsDaikin, Mitsubishi Electric, Fujitsu and more
Fixed pricesVAT included, confirmed in writing
Warranty registeredManufacturer terms confirmed in writing

See how it works

Multi-split air conditioning in three short clips

One outdoor unit serving several rooms, how it compares with separate single splits, and how indoor units are sized.

Multi-split air conditioning: one outdoor unit, many rooms
Multi-split air conditioning: one outdoor unit, many roomsOne outdoor unit connected to indoor units in several rooms.
Multi-split or several single splits
Multi-split or several single splitsComparing one multi-split system with separate single split systems.
Multi-split: sizing and mixing indoor units
Multi-split: sizing and mixing indoor unitsEach room gets an indoor unit sized for it, all linked to one outdoor unit.

One outdoor unit, several rooms

How does multi-split air conditioning work?

Can one air conditioner cool several rooms? Yes, if it is a multi-split or ducted system. A single wall unit only cools its own room.

Multi-split air conditioning links two to five indoor units to a single outdoor unit, so several rooms are cooled or heated from one condenser outside. Each room has its own remote and temperature. Aircova supplies and fits these systems in homes across London and the South East at fixed prices.

The outdoor unit holds the compressor, which is the part that does the hard work. It pumps R32 refrigerant through a pair of insulated copper pipes to each indoor unit in turn. Inside every room, a fan blows air across a coil. The refrigerant takes heat out of the air in summer or adds heat in winter.

Each indoor unit has its own pipe run back to the outdoor unit, plus a power and signal cable and a condensate drain. The outdoor unit has a separate connection port for every room. A three room system has three sets of pipes arriving at the back of the house.

Why the inverter matters

An inverter compressor speeds up and slows down to match how many rooms are calling for cooling. If only the bedroom is on at night, the compressor runs gently. When every room is on during a heatwave afternoon, it ramps up. That is why a single condenser can serve a small study and a large lounge without wasting power.

The outdoor unit is sized for the total load of all the rooms, not for each room on its own. A typical model for two rooms might be rated around 4 to 5kW, while one for four or five rooms is larger. We check the combined size against the manufacturer’s tables, because each brand allows a set range of indoor units on each outdoor model. Daikin, for example, says its 5MXM multi outdoor unit can run up to five indoor units, all in the same heating or cooling mode.

What each room controls

Every indoor unit has its own remote, its own set temperature, and its own timer. You can keep a bedroom at 19°C overnight and leave the spare room switched off. Most systems we fit also come with Wi-Fi control, so you can switch rooms on from your phone on the way home.

Illustration of one outdoor unit with a separate pipe run to a living room, a bedroom and a study, each indoor unit set to its own temperature or switched off
One outdoor unit on the back wall can feed up to five rooms, with a separate pipe run to each.

Fixed-price packages

Multi-split prices for 2, 3, 4 and 5 rooms

Our multi-split cost starts from £3,995 for two rooms and rises by about £1,500 for each extra room. That makes the cost per room lower as the system grows, from about £1,998 per room for two rooms to about £1,699 per room for five. Every price below is fitted, includes VAT, and is confirmed in writing after a free survey.

Two rooms

Air conditioning for 2 rooms, often a main bedroom and a lounge, on a shared outdoor unit.

from£3,995

Fitted, VAT included

  • Two indoor units, a shared outdoor unit
  • Up to 3m of pipe per indoor unit
  • Usually fitted in two days
  • Separate remote in each room
Get this price
Whole floor

Three rooms

Air conditioning for 3 rooms, enough for the bedrooms on a typical upper floor.

from£5,495

Fitted, VAT included

  • Three indoor units, a shared outdoor unit
  • Up to 3m of pipe per indoor unit
  • Usually fitted in two to three days
  • Wi-Fi control from your phone
Get this price

Four rooms

Bedrooms plus a living space, all from the same condenser.

from£6,995

Fitted, VAT included

  • Four indoor units, a shared outdoor unit
  • Up to 3m of pipe per indoor unit
  • Fitting days confirmed at survey
  • Wi-Fi control from your phone
Get this price

Five rooms

The largest home system on a single condenser, for most of a house.

from£8,495

Fitted, VAT included

  • Five indoor units, a shared outdoor unit
  • Up to 3m of pipe per indoor unit
  • Fitting days confirmed at survey
  • Wi-Fi control from your phone
Get this price

Prices include the indoor and outdoor units, up to 3 metres of pipework per indoor unit, a bracket for the outdoor unit, electrical connection, commissioning and VAT. Longer pipe runs, scaffolding or tower access, a consumer unit upgrade and internal wall chasing are priced at the survey. Our guide to aircon installation prices explains each extra with real figures.

For context, UK guides put two to three room systems at roughly £2,800 to £5,750, with London homes at the upper end. Our figures include VAT and named brands, and nothing is added after you agree. You pay 50% when you book and 50% during installation. You can also get an instant quote online in about two minutes.

Compare your options

Multi-split or several single splits?

If you want three rooms cooled, there are two ways to do it. You can fit one multi-split with three indoor units, or three separate single splits, each with its own outdoor unit. Both work well. The right choice depends on your outside space, your budget and how much you mind one fault affecting every room.

Outdoor space is often the deciding factor in London. A Victorian terrace with a narrow side return rarely has room for three condensers on the back wall. A single larger outdoor unit is easier to place, tidier to look at, and keeps one source of noise rather than three near the neighbours.

Single splits win on resilience. If one outdoor unit fails, only one room loses cooling. On a multi-split, a fault in the outdoor unit stops every room until it is fixed. For a home office that must stay cool, some owners keep that room on its own single split for this reason. Going the other way, two or three old single splits can be swapped for one multi-split when you replace your old air conditioning.

Comparison illustration of a brick wall with one multi-split outdoor unit and three pipe runs next to a wall crowded with three single split outdoor units
One outdoor unit on a bracket takes far less wall space than three separate condensers.
Multi-split compared with separate single splits (three rooms)
PointOne multi-splitThree single splits
Outdoor unitsA single larger unitThree smaller units
Aircova price from£5,495About £6,585 (3 x £2,195)
Outside wall spaceOne bracket or ground standThree positions needed
If an outdoor unit failsAll three rooms stopOnly one room stops
Pipe runsLonger, all back to one pointShort, one per room
Adding rooms laterOnly if a spare port was plannedAdd another single split

Pros and cons at a glance

Neither option is better in every home. This is how they compare once the units are on the wall.

Several single splits
  • One fault affects one room
  • Shortest pipe runs
  • Easy to add a room later
  • Needs space for every condenser
Multi-split
  • A single condenser to place
  • Lower price for three or more rooms
  • Tidier outside the house
  • One fault can stop every room

When one room is enough

If only one bedroom or office overheats, a single split is quicker and cheaper. It is usually fitted in a day, from £2,195. See our guide to wall-mounted air conditioning for the 2.5kW and 3.5kW options. For a shop, clinic or business office, see our commercial air conditioning service.

For nothing on the walls at all, a ducted system hides the indoor unit in the loft or ceiling. It feeds slim grilles in each room. Check how much void a ducted unit needs to see if your ceiling is deep enough.

Indoor units and sizing

Mixing indoor unit types and sizing each room

A multi-split does not have to use the same unit in every room. Most brands let you mix styles on a single condenser, as long as the combination sits inside the maker’s approved list.

Wall-mounted

Best for bedrooms and lounges

The most common indoor unit and the lowest price per room. It sits high on the wall and spreads air across the ceiling.

Floor console

Best under windows and in lofts

A low unit that sits where a radiator might go. It suits loft rooms with sloped ceilings and rooms with no clear high wall.

Ceiling cassette

Best for open plan kitchens

Fits flush into a ceiling and blows air in four directions. It needs a ceiling void above, so it suits extensions and renovations.

Ducted head

Best for a hidden finish

A slim unit hidden in the loft or ceiling feeds one or two rooms through grilles. Only the grille shows in the room.

How we size each room

Every indoor unit is sized for its own room. A bedroom up to about 20m² usually needs 2.5kW. A lounge or a sunny room often needs 3.5kW, and an open plan kitchen and dining space can need 5kW or more.

Room size is only the start. South and west facing glass, roof windows, a flat roof above, and the number of people in the room all add heat. A loft bedroom under a slate roof can need more power than a larger ground floor room. You can work out a starting figure with our BTU calculator, and 1kW is about 3,412 BTU per hour.

The outdoor unit is then matched to the total. Makers allow the indoor units to add up to a little more than the outdoor rating, because rooms rarely all need full power at once. We stay inside the approved range for each brand, so the warranty stays valid.

Planning a loft or flat? Pipe routes and consent are the two things to sort first. Our pages on loft conversions and air conditioning for flats cover both.

Floor plan illustration showing an open plan living area sized at 5 kW and two bedrooms sized at 2.5 kW each for a multi-split system
Open plan rooms often take a 5kW indoor unit, while bedrooms on the same system take 2.5kW.

Fitting days

Multi-split installation: steps and timing

A two or three room multi-split installation usually takes two to three days. The extra time compared with a single room comes from the pipe runs. Each indoor unit needs its own route back to the outdoor unit.

  1. Survey. We measure each room, plan every pipe route and check your consumer unit.
  2. Written quote. You get the models, room sizes, total price and fitting dates in writing.
  3. Day one. We protect floors, core drill each wall and mount the indoor units and brackets.
  4. Day two. Pipes, cables and drains are run in trunking or hidden routes back to the outdoor unit.
  5. Commissioning. We pressure test with nitrogen, vacuum each circuit, release the refrigerant and test every room.
  6. Handover. We show you each remote and the app, then register the manufacturer warranty.

Refrigerant work is regulated. Anyone who installs or services these systems needs an F gas qualification. The company also needs F gas certification, as the GOV.UK guidance on F gas explains. Every engineer on an Aircova job is certified, and we share their registration number before the first day.

Pipe routing in UK homes

Pipe routes are what make or break a tidy job. In a terrace, we often run the pipes for upstairs rooms through the loft and down the back wall in one neat trunking run. In a semi, the side wall usually gives a clear route from front bedrooms to the outdoor unit.

Flats are different. The outdoor unit usually goes on a balcony or a flat roof. Pipes may need to cross internal walls or run inside a boxed ceiling. Lease terms often require the freeholder’s written consent first. Where the outdoor unit changes how a building looks, check our planning permission guide and speak to your council, especially in conservation areas.

One multi-split can serve rooms upstairs and downstairs, as long as the pipe lengths and the height difference stay inside the maker’s limits for that model. We check both at the survey. For six or more rooms, two separate systems or a ducted system usually works better than stretching one condenser.

Where you are renovating, the best time to fit is before plastering. We can run pipework inside stud walls and floors, which leaves only the indoor units on show.

Side view illustration of a house with pipes from three indoor units running in white trunking down the outside wall to one outdoor unit, with a dashed alternative route through the loft
A study is a common second or third room on a multi-split, with its own remote and timer.

Typical homes we plan for

Two bedrooms in a Victorian terrace

The main bedroom faces the street, and the back bedroom overlooks the garden. We run the front pipes through the loft and down the rear wall, so nothing crosses the front of the house. The shared outdoor unit sits on a bracket above the side return. This is a typical two day job.

Three rooms in a 1930s semi

Two bedrooms and a home office share a single condenser on the side wall. The side wall gives a short, straight route to all three rooms. Brick cavity walls drill quickly, and the job usually runs over two to three days with the units tested on the last afternoon.

Bedroom and lounge in a mansion flat

The outdoor unit goes on the rear balcony on rubber feet, out of sight from the street. Pipes run inside a boxed section along the hallway ceiling. We supply the noise figures and spec sheets your managing agent will ask for before the work is booked.

Illustration of one outdoor unit heating a lounge, bedroom and study, with matched indoor units from one brand and a single service visit covering every unit

Heating, brands and servicing

Heating, brands and servicing for multi-room systems

Every multi-split we fit is also a heat pump that warms each room. In winter the outdoor unit runs in reverse, pulling warmth from the outside air and moving it into each room. That makes it a practical form of whole house air conditioning that also does the heating in the rooms it serves.

3 to 4kW of heat for every kW of electricity used
R32lower impact refrigerant than R410A
45 to 50dBtypical outdoor unit sound level

One point to know: on most home systems, all the indoor units run in the same mode at once. You can set different temperatures, but one room cannot cool while another heats. A heat pump also warms the air in each room only, not radiators or hot water.

Since 21 July 2026, the Ofgem Boiler Upgrade Scheme includes a £2,500 grant for air-to-air heat pumps in England and Wales. Only an installer certified by MCS for air-to-air can claim it, and none were certified when MCS last updated its list. Aircova does not hold MCS certification, so our heat pump prices never include the grant. Read the heat pump grant rules for the detail.

On efficiency, look for the SEER figure for cooling and the SCOP figure for heating on each model. Higher is better for both, and modern inverter systems reach a SCOP of around 4.

Brands we fit

We fit multi-split ranges from Daikin, Mitsubishi Electric, Fujitsu, Toshiba and Panasonic, with Samsung, LG and Hitachi on request, subject to availability. Compare the options on our pages for Daikin air conditioning installation, Mitsubishi Electric and Fujitsu. Mixing brands on one system is not possible, so the indoor units always match the outdoor unit.

Servicing a multi-split

A multi-split should be serviced once a year, and every indoor unit is cleaned on the same visit. We register the manufacturer warranty. The term depends on the brand and model and is confirmed in writing, and most makers ask for yearly servicing to keep it valid. Book a multi-split service with us and we check the refrigerant, coils, drains and filters in every room.

Why Aircova

Why choose Aircova for a multi-room system

Larger systems are where vague quotes cause the most trouble, so we price every multi-split room by room. Your written quote lists each indoor unit, its size, the outdoor model and any extras. If you want whole house air conditioning later, we can plan a spare port now. A fourth or fifth room can then be added without changing the outdoor unit.

Aircova is a London based company that handles home air conditioning installation across London, Surrey, Kent, Essex and Hertfordshire. Every job is done by F-Gas certified engineers. If a fault is caused by our fitting, we put it right at no cost.

  • Each room sized and shown on your written quote
  • Pipe routes agreed with you before drilling
  • Nitrogen pressure test and deep vacuum on every circuit
  • Warranty registered in your name, with paperwork left behind

FAQs

Multi-split air conditioning FAQs

How many rooms can one multi-split outdoor unit run?

Most home multi-split outdoor units run between two and five indoor units. The exact number depends on the model and on the combined size of the rooms. A two port outdoor unit suits a pair of bedrooms, while a five port model can cover most of a family house. We pick the outdoor unit from the maker’s approved combinations, so every room gets enough cooling and heating and the warranty stays valid.

Is a multi-split cheaper than separate single splits?

For three or more rooms, a multi-split is usually cheaper. At Aircova three rooms start from £5,495 on one outdoor unit, while three single splits start from about £6,585. For two rooms the gap is small. The choice often comes down to outdoor space and how you feel about one fault affecting both rooms. We price both options at the survey if you ask.

What happens if the outdoor unit breaks down?

If the outdoor unit develops a fault, every room on that system stops cooling or heating until an air con repair puts it right. A fault in one indoor unit usually affects only that room. Yearly servicing catches most problems early, such as a blocked drain or low refrigerant. If one room must never lose cooling, such as a home office, we can put it on its own single split.

Can I run just one room on a multi-split?

Yes, you can run one room on its own and leave the others switched off. The inverter compressor slows down to match the smaller load, so you are not paying to cool empty rooms. Each indoor unit has its own remote and timer, and most systems can also be switched room by room from a phone app.

Can one room heat while another room cools?

No, not on most home multi-split systems. All the indoor units share one outdoor unit, which runs in either cooling or heating mode at a time. You can still set a different temperature in each room. In the UK this is rarely a problem, because rooms in the same house usually need the same mode on any given day.

Can I add another indoor unit later?

Only if the outdoor unit has a spare port and enough spare capacity. Many people add a room after a loft conversion or an extension, so we ask about future plans at the survey. If you might want an extra room later, we can fit a larger outdoor unit now. We leave a capped connection ready for the extra pipe run.

How far can the indoor units be from the outdoor unit?

Each maker sets a maximum pipe length per room and for the whole system, and they vary by model. Our prices include up to 3 metres of pipe per indoor unit, which covers many back bedrooms and ground floor rooms. Longer runs, such as front bedrooms in a terrace, are measured and priced at the survey before you agree to anything.

Does a multi-split need planning permission?

Often not, but it depends on your home. In England, most small outdoor units on houses do not need planning permission if the appearance of the building is not materially affected. Flats, listed buildings and conservation areas often need consent. One outdoor unit instead of several usually makes approval easier, but always check with your council first.

What does a multi-split cost to run?

A multi-split costs about the same per room to run as single splits, because the inverter slows down when fewer rooms are on. As a guide, each 2.5kW room cooling on a typical summer day costs about 7p an hour, and about 15p in a heatwave, at the October 2026 price cap. Our running costs guide shows the sums.

Get your fixed price

Tell us how many rooms you want to cool and heat. We will call you with a fixed price for your multi-room system. No pressure and no obligation.

  • Reply within an hour
  • Free home survey
  • Price confirmed in writing

Prefer to talk? Call 07403 664179
Monday to Friday 8am to 6pm, Saturday 9am to 5pm

Aircova quick quote

We only use your details to prepare your quote. See our privacy policy.