Old unit removed New R32 system fitted

Air Conditioning Replacement: Old Unit Out, R32 In

Air conditioning replacement with Aircova costs the same as a new install, from £2,195 with VAT, for homes across London and the South East. The price includes taking away the old unit, with its refrigerant recovered by an F gas engineer. Most single rooms are swapped over in one day.

  • Old unit removal included
  • F-Gas certified engineers
  • Prices include VAT

Written by Aircova. Last updated October 2026. Prices last checked: October 2026

Illustration of an old R410A outdoor unit being replaced with a new R32 unit on the same brick wall, overseen by an engineer
F-Gas certifiedQualified, registered engineers
Top 5 brandsDaikin, Mitsubishi Electric, Fujitsu and more
Fixed pricesVAT included, confirmed in writing
Warranty registeredManufacturer terms confirmed in writing

See how it works

Air conditioning replacement in three short clips

Old system out and new one in, how long a unit lasts, and the signs it is time to replace.

Air conditioning replacement: old out, new in
Air conditioning replacement: old out, new inRemoving an old system, recovering its refrigerant and fitting a new R32 system.
How long does an air conditioner last?
How long does an air conditioner last?A home air conditioning unit usually lasts 10 to 15 years with yearly servicing.
Signs your air conditioner needs replacing
Signs your air conditioner needs replacingNoise, weak cooling, repeated faults and old refrigerant are signs to replace.

Like for like, or better

What does replacing an AC unit involve?

Replacing an AC unit means taking out the old indoor and outdoor units, recovering their refrigerant, and fitting a new R32 system. Aircova does the whole job for one fixed price, including removal and recycling of the old equipment, the new pipe connections, commissioning and warranty registration.

  • A free survey to check the old system, the wall, the pipe route and your fuse board
  • Refrigerant recovered from the old system by an F gas engineer, never vented
  • Old indoor and outdoor units taken away for recycling
  • A new inverter indoor unit and outdoor unit, sized for the room
  • New or flushed pipework, plus a fresh condensate drain connection
  • Nitrogen pressure test, vacuum, commissioning and a written record

Most people replace an old system for one of three reasons. It has stopped working, it keeps leaking gas, or it runs on a refrigerant that is getting hard to buy. The new unit usually sits in the same spot as the old one. That keeps the outside of your home tidy and the job short.

You do not have to keep the same layout. A replacement is a good moment to add a second room, move a unit away from a bed, or choose a quieter model. We talk this through at the survey before we quote.

The fitting standard is the same as for fitted air conditioning in homes with no system at all. The only extra work is the safe removal of the old kit, and that is already in the price.

Illustration of an old outdoor unit connected to a recovery machine and recovery cylinder so the old R410A or R22 gas is recovered before removal
Older outdoor units often run on R410A or even R22. We recover the gas before anything is disconnected.

Signs to look for

Repair or replace? Signs it is time for a new unit

A home air conditioning unit usually lasts 10 to 15 years with yearly servicing. Past that age, one big repair can cost a large share of a new system. The new one will also be quieter and cheaper to run.

Age of 10 to 15 years

Check the date on the outdoor unit label

Compressors and fan motors wear out with use. Once a system reaches this age, parts get harder to source and each fault costs more to fix.

R22 refrigerant

Mostly systems fitted before the mid 2000s

R22 damages the ozone layer and can no longer be used to refill systems in the UK. If an R22 unit loses its gas, a new system is the only real fix.

Repeated leaks

More than one regas in two years

A system that keeps losing gas often has corroded coils or tired joints. Fixing one leak can expose the next, so the costs keep adding up.

New noises

Rattles, grinding or loud start-ups

Worn bearings and failing fan motors get louder over time. Modern indoor units run from about 19dB in quiet mode, far below many older models.

Higher bills

Same use, more electricity

Dirty coils, low gas and older fixed-speed compressors all use more power for the same cooling. Rising bills with no change in use is a clear warning.

Weak cooling or heating

The room never reaches the set point

If the unit runs all day and the room stays warm in summer or cold in winter, it may be undersized or failing. A survey tells you which.

Repair or replace your air conditioning
SituationUsually repairUsually replace
Unit ageUnder about 8 years10 to 15 years or more
RefrigerantR32 or R410AR22
Gas leaksOne leak, found and fixedRepeated leaks or a corroded coil
FaultSensor, fan, PCB or drainFailed compressor out of warranty
Running costsSteady after a serviceStill high after a service

Replacing before it fails completely is often the calmer choice. You pick the date, you avoid a summer wait when installers are busiest, and you are not left without cooling or heating while parts are found for an old model.

Not sure yet? If your unit is under ten years old, start with a diagnostic visit. Our air conditioning repair visit finds the fault and quotes before any work. We only suggest a new system when the numbers point that way.

Fixed prices

Air conditioning replacement cost, with removal included

At Aircova, a replacement costs the same as a new install, and taking the old system away is part of the price. Every figure below includes VAT.

One room

Swap one old wall unit and its outdoor unit for a new R32 system.

from£2,195

Fitted, VAT included

  • New 2.5kW wall-mounted unit
  • Old unit removed and recycled
  • Up to 3m of pipework
  • Usually done in one day
Get this price

Two rooms

Replace two old units, or move to one multi-split outdoor unit.

from£3,995

Fitted, VAT included

  • Two indoor units, one outdoor unit
  • Old equipment removed and recycled
  • Separate control in each room
  • Usually fitted in two days
Get this price

Three rooms

Replace an older multi-room system with one new R32 outdoor unit.

from£5,495

Fitted, VAT included

  • Three indoor units, one outdoor unit
  • Old equipment removed and recycled
  • Usually fitted in two to three days
  • Wi-Fi control from your phone
Get this price

Larger single rooms cost from £2,395 for 3.5kW, £2,695 for 5.0kW and £2,995 for 7.0kW. Daikin and Mitsubishi Electric units add £200 per indoor unit. Old ducted systems are priced after a survey, starting from £6,995 for a new ducted unit serving two to three rooms.

How much does it cost to replace an AC unit?

Replacing an AC unit in the UK usually costs £1,500 to £3,200 for one room, about the same as a new install. At Aircova a single room replacement starts from £2,195 with VAT, and two rooms from £3,995. Removal of the old unit and recovery of its refrigerant are included.

The cost of replacing an AC unit depends on four things: the unit size, the brand, the state of the old pipework and access outside. The table shows what can add to the price, with typical UK figures where a published range exists.

What can add to the price of an air conditioning replacement
ExtraAircovaTypical UK range
Old unit removal and gas recoveryincludedoften included, check your quote
Electrical work or consumer unit changespriced at the survey, in writing£100 to £300
Extra wall hole (core drilling)priced at the survey, in writing£50 to £150 per hole
Acoustic housing for the outdoor unitpriced at the survey, in writing£250 to £500
Pipe run over 3 metrespriced at the survey, in writingno published range, depends on length
Scaffolding or tower accesspriced at the survey, in writingno published range, depends on height

Typical UK ranges are from the MyBuilder AC replacement cost guide (updated August 2026), checked October 2026. The same guide puts installer day rates at £500 to £720.

Want the full picture first? Our guide to air conditioning installation cost breaks prices down by room, brand and kW. When you are ready, you can use our online quote tool in about two minutes.

Bar chart comparing the global warming potential of R410A at 2,088 with R32 at 675, against the 750 limit for new single split systems from 2025

F gas rules

R410A to R32: what the F gas rules mean

Since 2025, new single split systems holding less than 3kg of refrigerant cannot be placed on the market if their gas has a global warming potential (GWP) above 750. That is set out in the government guidance on F gas bans in new equipment.

  • 2,088 GWP of R410A, the gas in most older systems
  • 675 GWP of R32, used on the units we fit
  • 750 GWP limit for new single splits from 2025

The ban covers new equipment only. If you have an R410A system that works, it is still legal to service and repair it. The catch is supply. R410A is an HFC under the UK phase down, so gas and parts are likely to get scarcer and dearer.

An R410A unit cannot simply be filled with R32. The two gases run at different pressures and use different oils. So the R410A to R32 upgrade means new indoor and outdoor units. Your old pipework may still be usable, which we cover below.

How much more efficient is a new unit?

Modern inverter units vary their compressor speed instead of switching on and off. Many reach A++ for cooling, which means a SEER of at least 6.1. In winter, a SCOP around 4 gives about 3 to 4 kW of heat per kW of electricity. A ten year old unit, especially a fixed-speed one, will usually use noticeably more power for the same comfort.

Here is a worked example. It is an illustration only, built on stated assumptions, not a promise. Say a room needs 500 kWh of cooling over a summer and 2,000 kWh of heat over a winter, with electricity at 25p per kWh.

  • Old fixed-speed unit at SEER 3.0 and SCOP 2.5 uses about 967 kWh, or about £242 a year
  • New A++ inverter unit at SEER 6.1 and SCOP 4.0 uses about 582 kWh, or about £146 a year
  • Difference of about 385 kWh, or about £96 a year

So the saving alone rarely pays for a new system. The stronger reasons to replace are age, repeated leaks and the refrigerant. Your real figure depends on the old model and how you use it.

Existing pipework

Can your existing pipework be reused?

Often, yes. Reusing pipework can save time and avoid new holes or trunking, especially where pipes run inside walls or ceilings. It only works when the old copper is the right size, thick enough and clean inside.

Manufacturers set strict conditions. The pipe must be dry, clean and leak free, and the old oil must not be dirty or burnt. Where it is reused, we flush the pipe to clear old oil and remake every flare with new flare nuts. Then we pressure test with nitrogen and pull a deep vacuum.

When old pipes can stay

Usually reusable
  • R410A pipe of the right size
  • Holds nitrogen pressure
  • Clean oil, no burnout
  • Pipe run within the new unit’s limits
Usually replaced
  • R22 pipe with dirty or burnt oil
  • Thin wall or kinked copper
  • Damaged insulation outside
  • Wrong size for the new unit

If the old compressor burnt out, acid and debris can stay in the pipe, so we fit new copper. The same goes for a pipe route that is ugly or in the wrong place. Either way, you see the choice and its price before the day.

Illustration of a new wall air conditioner fitted in the outline of the old unit, reusing the existing pipe hole and route
A new indoor unit can often go on the same wall, using the old pipe hole and route.

Your new system

Choosing your new system

A replacement does not have to copy the old layout. These are the three usual routes, and the brands we fit as replacements.

One old unit

Like for like swap

Most single room replacements go back as one indoor and one outdoor unit in the same places.

Several old units

Fewer boxes outside

Two or three old outdoor units can often become one, with each room keeping its own control.

Old ducted system

Hidden in the ceiling or loft

We check the existing ductwork and grilles, and reuse them where they are clean and sound.

Every new unit we fit also heats your home as a heat pump. That can cut the use of panel heaters in winter. Unsure about the size? Our room size calculator gives a guide from your room size.

Brands we fit as replacements

DaikinQuiet indoor units with strong heating output.Daikin air conditioning
Mitsubishi ElectricPremium build quality, with very quiet modes on some indoor units.Mitsubishi Electric units
FujitsuEfficient units that keep a multi-room replacement affordable.Fujitsu air conditioning
ToshibaSlim wall units, useful where the new unit must fit the old footprint.
PanasonicEtherea and other wall units for single rooms.

We register the manufacturer warranty on the new system. The term depends on the brand and model and is confirmed in writing. If a fault is caused by our fitting, we put it right at no cost, as our warranty and aftercare page explains. Book an air conditioning service each year, as most makers ask for one. Prefer to talk it through first? Request your replacement price and we will reply on WhatsApp.

On the day

What happens on replacement day?

A single room replacement is usually a one day job. Two or three rooms on a multi-split take two to three days. These are the steps we follow every time.

  1. Protect the room. We cover floors and furniture, and isolate the power to the old system.
  2. Recover the gas. An F gas engineer pumps the refrigerant into a recovery cylinder, never into the air.
  3. Remove the old units. Indoor unit, outdoor unit and bracket come off, and we check the wall.
  4. Prepare the pipework. We flush and test the old pipe, or run new insulated copper.
  5. Fit the new system. New indoor and outdoor units go up, with fresh flares and a condensate drain.
  6. Test and commission. Nitrogen pressure test, vacuum, gas released, then cooling and heating checked.
  7. Handover. We show you the controls, register the warranty and take the old kit away.

What happens to your old unit

Air conditioning fitted to a building must have its F gas recovered by a qualified person before it is scrapped. The government rules on recovering F gas also require a registered waste carrier to move it. We take the recovered gas for reclaim or disposal and send the metal and electronics for recycling as waste electrical equipment (WEEE).

Illustration of an old outdoor unit lifted off its wall bracket and a new unit fitted on the same bracket the same day, with the old unit recycled
Balcony and wall bracket outdoor units are swapped on the same day, often on the same fixings if they are sound.

FAQs

Air conditioning replacement FAQs

How much does it cost to replace an AC unit in the UK?

A single room replacement usually costs about the same as a new install. That is £1,500 to £3,200 across the UK, with London at the top end. At Aircova, replacing an AC unit starts from £2,195 for one room and £3,995 for two rooms, with VAT. Removal of the old unit and recovery of its refrigerant are included in that price.

How long do air conditioning units last?

Most home split systems last 10 to 15 years. Yearly servicing, clean filters and a well placed outdoor unit help them reach the top of that range. Units on a coastal or polluted site, or ones that run hard all year, tend to wear out sooner. Past 10 years, it is worth comparing any big repair quote with the price of a new system.

Is R410A being banned in the UK?

No, not for existing systems. Since 2025, new single split systems under 3kg of refrigerant cannot use a gas with a GWP above 750. That rules out R410A on those new units. You can still service and repair an R410A system you already have. Supply is shrinking under the HFC phase down, so gas and parts are likely to cost more over time.

Can I put R32 gas in my R410A air conditioner?

No. R32 and R410A run at different pressures and need different oils and components, so an R410A unit must not be filled with R32. Moving to R32 means fitting a new indoor and outdoor unit. The good news is that clean R410A pipework of the right size can often be reused after flushing and testing.

Can I replace just the outdoor unit?

Usually not. Indoor and outdoor units are designed as a matched pair. A new R32 outdoor unit will not work with an old R410A or R22 indoor unit. Swapping only one half also leaves the older part as the next thing to fail. We replace both units together, which keeps the manufacturer warranty valid.

What happens to my old air conditioning unit?

We take it away for you. First, an F gas engineer recovers the refrigerant into a cylinder so none escapes. The gas goes for reclaim or disposal, and the metal, copper and circuit boards go for recycling through licensed routes. Removal and recycling are included in our replacement price, so there is no separate charge.

Do I need permission to replace an existing air conditioning unit?

Often not, if the new unit goes in the same place and looks much the same. A new position, a larger outdoor unit or a flat may change that. Flats usually need freeholder or managing agent consent, and listed buildings or conservation areas may need council consent. We check this at the survey and tell you in writing.

Can I get a grant to replace my air conditioning?

Not through Aircova, and not for a like for like swap. The Boiler Upgrade Scheme added an air-to-air category from 21 July 2026, but it is for replacing fossil fuel or direct electric heating, and only an MCS installer certified for air-to-air can claim it. No installer holds that certification yet, and Aircova does not hold MCS. Our prices never include a grant. Our air-to-air heat pump grant page explains the rules.

Should I replace my air conditioning in winter?

Winter is often the best time. Installers are less busy from October to March, so you can choose your date, and your new unit starts heating your home straight away. If your old system failed at the end of summer, replacing it before spring means it is ready before the first heatwave books everyone up.

Get your fixed price

Tell us about your old system and we will call you with a fixed replacement price, removal included. No pressure and no obligation.

  • Reply within an hour
  • Free home survey
  • Price confirmed in writing

Prefer to talk? Call 07403 664179
Monday to Friday 8am to 6pm, Saturday 9am to 5pm

Aircova quick quote

We only use your details to prepare your quote. See our privacy policy.