All major brands Fault found, price agreed, then fixed

Air Conditioning Repair by F-Gas Certified Engineers

Aircova offers air conditioning repair for homes across London and the South East, with a diagnostic visit from £95. Our engineer finds the fault, tells you the fixed price for parts and labour, and only starts once you agree. We repair split, multi-split and ducted systems from every major brand, including units we did not fit.

  • F-Gas certified engineers
  • Price agreed before work starts
  • Prices include VAT

Written by Aircova. Last updated October 2026. Prices last checked: October 2026

Illustration of an engineer with a diagnostic tablet at the outdoor unit while the indoor unit blows warm air and shows a warning
F-Gas certifiedQualified, registered engineers
Top 5 brandsDaikin, Mitsubishi Electric, Fujitsu and more
Fixed pricesVAT included, confirmed in writing
Warranty registeredManufacturer terms confirmed in writing

See how it works

Air conditioning repair in three short clips

From fault to fixed, what to check before calling an engineer, and why R32 replaced older refrigerants.

Air conditioning repair: from fault to fixed
Air conditioning repair: from fault to fixedAn air conditioner that is not cooling is diagnosed and repaired by an engineer.
Air conditioning not working: what to check first
Air conditioning not working: what to check firstSimple checks to make before calling an engineer.
Older refrigerant versus R32
Older refrigerant versus R32Why current air conditioners use R32 instead of older R410A or R22.

How it works

What does air conditioning repair involve?

Air conditioning repair means finding why a split, multi-split or ducted system has stopped cooling or heating properly, then fixing that cause. Aircova sends an F-Gas certified engineer to test the electrics, airflow and refrigerant circuit, then quotes a fixed price for the fix before any work starts.

Most faults fall into three groups. Some are simple, such as a clogged filter or a blocked condensate drain. Some are electrical, such as a failed sensor, fan motor or circuit board. The rest involve the refrigerant circuit, which usually means a leak at a pipe joint.

The first two groups are often fixed on the same visit if the part is common. A refrigerant fault needs more care. The law says only a qualified person can open the circuit, and the leak must be found and sealed before any gas goes back in.

Ask any engineer how they price the work, and whether they find leaks before they add gas. Those two answers tell you most of what you need to know.

Quick checks before you call

Some faults turn out to be a setting, a switch or a dirty filter. These checks take ten minutes, cost nothing and are safe to do yourself.

  • Put fresh batteries in the remote, and check the display shows the mode you want
  • Set the mode to cool or heat, not fan or dry, and set a target a few degrees past the room temperature
  • Slide out the indoor filters, rinse them in lukewarm water, let them dry and refit them
  • Check the breaker in your consumer unit and the isolator switch next to the outdoor unit
  • Clear leaves, bins or covers from around the outdoor unit so air can flow
  • In winter, wait 10 to 15 minutes if the unit has paused, as it may be defrosting

Never open the casing or touch the pipe valves. If a check does not fix it, note any blinking lights or codes and contact an air conditioning engineer.

Illustration of quick checks before an air conditioning repair: a tripped breaker in the consumer unit, remote batteries, the cool mode setting and dirty filters
We test the power supply and controls first, as many faults start with the electrics.

Symptoms and causes

Common air con faults and what causes them

The symptom points to a short list of causes. This table shows what usually sits behind each one, what you can safely check, and how an engineer normally fixes it.

Common home air conditioning faults, causes and fixes
SymptomLikely causeCan you check it yourself?Typical fix
Not cooling or heatingWrong mode, dirty filters or low refrigerant from a leakYes, check the mode and clean the filtersLeak found and sealed, then a regas
Water dripping from the indoor unitBlocked condensate drain, a kinked hose or an iced coilPartly, clean the filters and look at the drain outletDrain cleared, hose rerouted or pump replaced
Ice on the pipes or coilLow refrigerant or very poor airflowOnly the filters, then switch off to thawLeak find and regas, or a fan repair
Blinking lights or a fault codeSensor (thermistor), fan motor, circuit board (PCB) or a link fault between unitsNote the code and look it up in your manualPart tested and replaced
Will not switch onFlat remote batteries, a tripped breaker or a failed boardYes, batteries, breaker and isolatorElectrical tests, fuse or board replaced
Rattling, buzzing or clickingLoose panel, worn fan bearing or a failed mountLook for loose covers or debris outsideMounts, fan or bearing replaced
Musty smell when it startsMould on the filters, coil or drain trayYes, clean the filtersCoil and drain tray cleaned as part of a service

Air conditioning leaking water inside

Your indoor unit pulls moisture out of the air as it cools. That water collects in a tray and runs away through a small condensate drain. If the drain blocks with dust or slime, the tray overflows and water drips down the wall.

A unit fitted slightly off level can do the same, as can a drain hose that kinks or rises on its way out. Where the unit has no fall to the outside, a small condensate pump lifts the water, and a failed pump is a common cause.

Switch the unit off and put a towel under it. A leak only in cooling mode, after weeks of use, usually points to the drain. A leak with ice on the pipes points to low refrigerant, which is a different repair.

Air con not cooling or blowing warm air

Start with the quick checks above, because the mode setting and dirty filters cause many of these calls. If air still comes out warm in cooling mode, check that the outdoor unit fan is turning.

A silent outdoor unit suggests a power, capacitor or board fault. A running unit with weak cooling, ice on the pipes or a hiss near the joints points to a refrigerant leak. Both need an engineer with the right test kit.

Close-up illustration of copper pipes joined to an outdoor unit's service valves, with leak-detection bubbles showing a refrigerant leak at the flare joint
Most refrigerant leaks are found at the flare joints where the copper pipes meet each unit.

Thinking of an air conditioning gas top up? A home split system is sealed, so it does not use up gas. If the refrigerant is low, there is a leak. Adding gas without finding it means paying again within weeks or months. We find and fix the leak first, then regas.

Fixed prices

Air conditioning repair prices

We charge a fixed fee for the visit, then quote the repair before any work starts. Prices include VAT and cover London and the South East.

Diagnostic visit

An engineer finds the fault and gives you a fixed repair price.

from£95

VAT included

  • Electrical and control tests
  • Stored codes read and checked
  • Refrigerant pressures measured
  • Written price for parts and labour
Get this price

Leak find and regas

For R32 systems that have lost cooling or heating power.

from£165

VAT included

  • Leak traced with a detector
  • Regas only once the leak is fixed
  • Nitrogen pressure test and vacuum
  • Weighed R32 charge to the maker’s figure
Get this price

New wall-mounted unit

When a repair no longer makes sense, a like for like swap.

from£2,195

Fitted, VAT included

  • 2.5kW single room system
  • Old unit removed and recycled
  • Up to 3m of pipework
  • New manufacturer warranty
Get this price

How much does air conditioning repair cost?

Air conditioning repair starts with a diagnostic visit, from £95 with VAT at Aircova. An R32 leak find and regas is from £165. Across the UK, a weekday call-out usually costs £130 to £180 including the first hour. A circuit board or fan is a few hundred pounds, and a compressor can pass £1,000.

Air conditioning repair prices: Aircova and typical UK ranges
Fault or partAircova, VAT includedTypical UK range
Call-out or diagnostic visitfrom £95£130 to £180 on a weekday, £170 to £220 at weekends, first hour included
Labour after the first hourincluded in the fixed repair price£30 to £60 an hour
Leak find, repair and regasfrom £165 on R32 systemsleak repair £300 or more, refrigerant £35 to £130
Sensor or thermostatfixed price after diagnosis£100 or more
Fan or fan motorfixed price after diagnosis£200 or more
Circuit board (PCB)fixed price after diagnosis£300 or more
Evaporator (indoor coil)fixed price after diagnosis£400 or more
Condenser (outdoor coil)fixed price after diagnosis£600 or more
Compressorfixed price after diagnosis£1,000 or more

Typical UK ranges are from the Checkatrade home air con cost guide (updated April 2026), checked October 2026. They are market figures, not Aircova prices.

What changes the repair price? The part, the brand and access all matter. A sensor costs far less than a compressor or main board. Parts that must be ordered, and any return visit, are shown in the written price before you agree. Outdoor units on a high wall may need a tower, which we price before booking.

Older systems that run on R410A gas are priced at the visit. For new systems, our air conditioning prices page breaks down every fitted price.

On the day

What happens on an air con repair visit?

We book repair visits as soon as we have availability, in our working hours, and confirm the date when you get in touch. The engineer arrives with gauges, a leak detector and electrical test kit. A multi-split or ducted system takes longer to check than a single wall unit.

  1. Listen first. We ask what the unit is doing, when it started and which codes or lights you have seen.
  2. Check the basics. Remote, settings, filters, power supply and the isolator are tested before anything is opened.
  3. Read the fault data. We read stored codes and test sensors, fans and boards against the maker’s figures.
  4. Test the refrigerant circuit. Pressures and temperatures are measured, and joints are checked with a leak detector.
  5. Explain and price. You get the cause in plain words and a fixed price for parts and labour.
  6. Repair with your agreement. Common faults are often fixed on the day, and parts on order get a return date.
  7. Test and record. We run the unit in cooling and heating, then leave a written record of the work.

Any work on the refrigerant circuit is regulated. Engineers who repair or leak check equipment holding F gas need the right qualification, and their company needs certification, as the GOV.UK F gas guidance explains. Recovered gas is taken away for recycling, never vented.

We work on systems in houses, flats and loft rooms across the capital. In mansion blocks and converted flats the outdoor unit can sit on a balcony or flat roof, so let us know about access when you book.

Illustration of a torque wrench tightening a remade flare joint and a nitrogen cylinder with a pressure gauge testing the repair
Flare joints are remade with the correct tools and torque, then pressure tested with nitrogen.
Decision illustration showing when to repair an air conditioner (sensor, fan, drain or single leak) and when to replace an old unit, with a £95 diagnostic visit and £165 regas

Honest advice

Should you repair or replace your unit?

An air con repair is usually the right call for a sensor, fan, drain or single leak. Replacement starts to make sense when the repair is large and the unit is old.

  • From £95 diagnostic visit, so you know the fault before you decide
  • From £165 leak find and regas on R32 systems
  • From £2,195 a new 2.5kW wall-mounted system, fitted

We look at three things before we advise you. The first is the cost of the repair against the price of a new unit. The second is the age of the system and whether its parts are still made. The third is the refrigerant.

Many older units run on R410A. Current models use R32, which has a lower global warming potential and comes in more efficient inverter designs. A modern unit gives about 3 to 4 kW of heat per kW of electricity.

A failed compressor on an old R410A unit, or a second leak in the same year, often tips the sum toward a new system. Our page on replacing an AC unit covers removal, recycling and the swap to R32. If you go ahead, a new wall-mounted unit is often fitted on the same brackets and pipe route.

We will never push you to replace a unit that a fair repair will keep running. If the fix is small, we fix it.

Any make, any installer

Brands we repair and what fault codes mean

We repair systems from every major brand, including units fitted by other companies or by a previous owner. These five are the brands UK installers fit most often.

DaikinWall, floor and concealed units, including the Perfera, Emura and Comfora.Daikin air conditioning
Mitsubishi ElectricMSZ wall units, including the MSZ-LN and MSZ-AY, plus multi-split systems.Mitsubishi Electric units
FujitsuWall-mounted, multi-split and ducted systems for homes.Fujitsu air conditioning
ToshibaWall units such as the Haori, plus multi-split systems.
PanasonicEtherea and other wall units, including older R410A models.

We also repair Samsung, LG and Hitachi systems on request, subject to availability, and most other mainstream makes. Tell us the brand and model when you book, so the engineer brings the right data.

Codes and blinking lights

A code is the unit’s way of telling you which part of the system has a problem. Some units show a code such as E1 or U4 on the display or remote. Others blink the operation or timer light a set number of times.

The same code can mean different things on different brands, so a list from another maker will mislead you. Look in your user manual, or download it from the maker’s site, such as the Daikin customer support page.

Note it
Write down the code or count the blinks before you reset anything.
Reset once
Switching off at the isolator for five minutes can clear a one-off fault.
Call us
If the code comes back, send it to us with the model number.

Systems we work on

We repair single room splits, multi-split systems with up to five indoor units, and ducted air conditioning hidden in lofts and ceiling voids. Every one of them is also a heat pump in winter.

Usually fixed on the day
  • Blocked condensate drain
  • Failed sensor or fuse
  • Dirty coil and filters
  • Loose wiring or panels
Often needs a return visit
  • Main board or fan motor
  • Compressor or valve
  • Leak repair and regas
  • Ducted unit access work

Fewer faults

Preventing faults and areas we cover

The cheapest repair is the one you never need. Most of the faults above start small and show up early on a routine check.

Servicing to prevent faults

Many breakdowns start as dirt. Clogged filters cut airflow, a slimy drain overflows, and a dirty coil makes the compressor work harder. A yearly air conditioning service cleans these parts and checks the refrigerant pressures, so small problems show up early. For offices, shops and restaurants, we also offer commercial maintenance contracts built around each site.

Many manufacturer warranties depend on a yearly service, and the term depends on the brand and model. Our warranty and aftercare page explains more.

Areas we cover

Our air conditioning engineers cover London and nearby counties, including Surrey, Kent, Essex and Hertfordshire. We plan parking and access before the visit, which matters in residents’ zones and narrow side returns.

If you need a new system rather than a fix, see our air conditioning installation service, or get an instant quote online.

Aircova serves homes and businesses across London and the South East. Call or WhatsApp 07403 664179. Monday to Friday 8am to 6pm, Saturday 9am to 5pm.

FAQs

Air conditioning repair FAQs

How much does air conditioning repair cost?

Most repairs start with a diagnostic visit, which costs from £95 with Aircova in London and the South East. Across the UK, a weekday call-out usually costs £130 to £180 including the first hour. Once the fault is found, we give you a fixed price for parts and labour. An R32 leak find and regas starts from £165. UK cost guides put a circuit board at £300 or more and a compressor at £1,000 or more. You agree our price before we start.

How quickly can you come out, and do you do emergency repairs?

We book repair visits as soon as we have availability, in our working hours of Monday to Friday 8am to 6pm and Saturday 9am to 5pm, and confirm the date when you contact us. Out of hours visits can sometimes be arranged, depending on availability. Send the brand, model and any fault code on WhatsApp so we can plan parts. If the unit is leaking or tripping the power, switch it off at the isolator until we visit.

Can you just top up the gas in my air conditioning?

No, we do not top up gas without finding the leak first. A home split system is sealed, so the refrigerant should last the life of the unit. Low gas always means a leak somewhere, usually at a flare joint. Adding gas alone only hides the fault for a while. We trace the leak, seal it, pressure test the circuit, pull a vacuum and then weigh in the correct charge.

Why is my air conditioner leaking water inside?

A blocked condensate drain is the most common reason. The indoor unit removes moisture as it cools, and that water must drain outside. Dust and slime can block the drain, or a hose can kink, so the tray overflows. A unit that is off level or a failed condensate pump can do the same. Ice on the pipes as well suggests low refrigerant instead.

Why is my air con running but blowing warm air?

Check the settings first, as a unit in fan, dry or heat mode will not cool. Then clean the filters and check the outdoor unit fan is turning. If the outdoor unit is silent, the cause is often a capacitor, board or power fault. If it runs but cooling is weak, a refrigerant leak is the likely cause, and an engineer needs to test it.

Do you repair air conditioning you did not install?

Yes, we repair systems fitted by any installer, including units that came with your home. We work on all major brands, including Daikin, Mitsubishi Electric, Fujitsu, Toshiba and Panasonic, with Samsung, LG and Hitachi on request, subject to availability. It helps to send a photo of the model label on the indoor and outdoor units when you book. That way the engineer can check parts and fault data before the visit.

What do the fault codes on my air conditioner mean?

A fault code points to the part of the system with a problem, but each brand uses its own codes. A code such as E1 or U4 can mean different things on a Daikin, a Toshiba or a Fujitsu. Some units blink a light a set number of times instead. Check your user manual for the meaning, then send us the code and model number.

Is it worth repairing an old air conditioning unit?

It is usually worth repairing a small fault such as a sensor, fan or drain, whatever the age. For a failed compressor or repeated leaks on an older R410A unit, a new R32 system often makes more sense. We compare the repair price with a new fitted unit, from £2,195, and give you both figures so you can decide.

Will a repair affect my manufacturer warranty?

A repair by an F gas certified air conditioning engineer using the right parts should not affect your warranty. If the unit is still under warranty, contact the company that fitted and registered it first, as the claim normally goes through them. If they have stopped trading or will not help, we can inspect the unit and tell you what the maker is likely to cover.

How long does an air con repair take?

Many repairs are finished on the first visit. A blocked drain, failed sensor or loose connection is often fixed the same day. A leak repair and regas can take half a day, as the circuit must be pressure tested and vacuumed. If a part has to be ordered, we give you a return date and fit it then.

Get your fixed price

Tell us what your unit is doing, the brand and any fault code, and we will call you to book a diagnostic visit. No pressure and no obligation.

  • Reply within an hour
  • Diagnostic visit from £95
  • Repair price agreed before work starts

Prefer to talk? Call 07403 664179
Monday to Friday 8am to 6pm, Saturday 9am to 5pm

Aircova quick quote

We only use your details to prepare your quote. See our privacy policy.