2026 guide England, Wales and Scotland rules

Air Conditioning Planning Permission, Explained Simply

Air conditioning planning permission is not needed for most single outdoor units on houses in England, as long as the unit also heats and meets the permitted development limits. Flats, listed buildings and conservation areas have stricter rules. We fit across London and the South East and check the planning position before we quote.

  • Rules checked against official sources
  • Planning position checked at survey
  • Fixed price in writing

Last updated: October 2026

Illustration of a house with an air conditioning outdoor unit and a permitted development stamp, showing the 1.5 cubic metre outdoor unit rule
F-Gas certifiedQualified, registered engineers
Top 5 brandsDaikin, Mitsubishi Electric, Fujitsu and more
Fixed pricesVAT included, confirmed in writing
Warranty registeredManufacturer terms confirmed in writing

See how it works

Planning permission for air conditioning in three short clips

The rules in England, outdoor unit size and noise limits, and what to check before fitting.

Air conditioning planning permission in England
Air conditioning planning permission in EnglandSince 29 May 2025 a heating and cooling split unit can be permitted development if conditions are met.
Planning permission: outdoor unit size and noise limits
Planning permission: outdoor unit size and noise limitsThe outdoor unit size and noise limits for permitted development.
Check planning rules before you fit air conditioning
Check planning rules before you fit air conditioningCountry, building type, unit size and noise are the checks before fitting.

The short answer

Do I need planning permission for air conditioning?

Usually not, for a house in England. Since 29 May 2025, a split unit that heats as well as cools is permitted development if the outdoor unit is 1.5 cubic metres or less, meets the MCS 020(a) noise limit of 37 dB(A) and is not above ground floor on a wall facing a road. Flats, listed buildings and conservation areas have stricter rules.

Aircova checks this for every home before fitting. Planning law treats most modern split systems as air source heat pumps. The outdoor unit takes heat from outside air in winter and reverses in summer to cool. That matters, because heat pumps on homes have their own set of permitted development rights.

Permitted development means you can do the work without applying to the council. The rights come with limits and conditions. If your install breaks any one of them, it needs a full planning application instead.

Quick answer by home type

Whether air conditioning usually needs planning permission in England
HomeUsual positionWhat to check
House, heat pump unitPermitted developmentSize, number of units, wall facing the road, noise
House, cooling-only unitOutside the heat pump rightsAsk your council
FlatLimited rights for the whole blockCouncil, freeholder and lease
Listed buildingNot permitted developmentPlanning and listed building consent
Conservation areaStricter siting rulesWalls facing the road, any article 4 direction
Flowchart: if the unit heats and cools, the outdoor unit is 1.5 cubic metres or less, noise is 37 dB(A) at the neighbour and it is not on a pitched roof, permission is usually not needed
If the unit heats and cools, meets the size and noise limits and avoids a pitched roof, permission is usually not needed.

Permitted development in England

The 2025 air source heat pump planning rules

The rules for heat pumps on homes sit in Class G of Part 14 of the General Permitted Development Order. They changed on 29 May 2025, and the changes made it much easier to fit an outdoor unit on a house.

The limits on a house

Size
Outdoor unit up to 1.5 cubic metres.
Number
One unit, or two on a detached house.
Roofs
Never on a pitched roof. On a flat roof, at least 1m from the edge.
Front walls
Not above ground floor on a wall that faces a road.
Noise
Must meet the MCS 020(a) standard.

What changed in May 2025

Before
  • Unit at least 1m from the boundary
  • Up to 0.6 cubic metres
  • One unit per home
  • Heating use only
Now
  • No 1m boundary rule
  • Up to 1.5 cubic metres on a house
  • Two on a detached house
  • Heating and cooling allowed

The Planning Portal heat pump guidance lists the same limits for England. It also says the unit must not be installed within the curtilage of a listed building or on a scheduled monument.

Three conditions apply on top of the limits. The unit must be sited, so far as practicable, to keep its effect on the look of the building and the area low. It must be removed when no longer needed. And it must not be used only for cooling.

The noise test in MCS 020(a)

The outdoor unit is the part that matters for noise. Under MCS 020(a), the installer calculates the sound level 1m outside the nearest door or window to a habitable room in each neighbouring home.

The result must be 37.0 dB(A) or lower, using the manufacturer’s normal sound power figure, not quiet mode. If it is higher, the install is not permitted development. Barriers and a better position can bring the figure down.

The MCS notice on the new rules sets out the 2025 changes, including the end of the 1m boundary rule. Planning Portal says MCS 020(a) is the only standard accepted from 28 May 2026.

A quiet outdoor unit helps you pass the noise test and keeps neighbours happy. Our guide to the quietest air conditioning units compares indoor and outdoor sound levels.

Comparison illustration: an air-to-air heat pump that heats and cools is permitted development, a cooling-only unit needs planning permission

Heat pump or cooling only

Cooling-only units and air-to-air heat pumps

The legal test is how the unit is used. Class G now says the heat pump must not be used solely for cooling. A reverse cycle split system that heats in winter passes. A cooling-only unit does not.

29 May 2025new rules in force
37 dB(A)at a neighbour’s window

Before May 2025, the condition said the unit had to be used solely for heating. That left air conditioning in a grey area. The new wording brings an air-to-air heat pump that heats and cools inside permitted development.

A cooling-only unit falls outside these heat pump rights. In its note on air conditioning rules of 25 June 2026, the government says air conditioning is not banned in homes, and most small home units need no permission if they do not materially change how the building looks. It also says there is no blanket rule, so check with your council. If you would rather avoid an outdoor unit altogether, our guide to portable vs split air conditioning compares the options.

Nearly every unit we fit is an inverter heat pump with R32 refrigerant and a heating mode. The Boiler Upgrade Scheme now has an air-to-air category, but only an MCS installer certified for air-to-air can claim it, and none is certified yet. Aircova does not hold MCS, so our prices never include a grant. Our page on the air-to-air heat pump grant explains where it stands.

Special cases

Flats, listed buildings and conservation areas

These three cases raise most planning questions. Each has its own rule, and more than one can apply to the same home.

Flats and maisonettes

Class G covers a block of flats, but the allowance is small. Only the first air source heat pump on or within the curtilage of a block is permitted development, and its outdoor unit must be 0.6 cubic metres or less.

So if another flat already has a unit, yours is likely to need planning permission. Your lease may also need the freeholder’s written consent. Our page on air conditioning for flats covers balconies, freeholders and where the outdoor unit can go.

Listed buildings

Permitted development does not apply on a listed building or anywhere in its curtilage, so a planning application is needed. Fixing a unit can also need listed building consent.

The GOV.UK historic environment guidance says works that affect a listed building’s character need consent. Doing them without it is a criminal offence.

Conservation areas and article 4

In a conservation area or World Heritage Site, the unit cannot go on a wall or roof that fronts a road. It also cannot sit nearer to the road than the house itself. A rear wall or back garden is the usual answer.

Councils can also remove permitted development rights with an article 4 direction or a condition on an earlier planning permission. Some councils use them in conservation areas, so check with your council before you buy.

How to check if your home is listed or in a conservation area

Search the address on the Historic England National Heritage List to see if your home is listed. Most councils publish conservation area maps on their website. Ask the council planning team if an article 4 direction or an old planning condition removes permitted development rights for your street.

London has many conservation areas. See our page on London air conditioning for the areas we cover.

Three illustrations of a block of flats, a listed building and a conservation area house, each needing consent or planning permission before air conditioning
Flats, listed buildings and conservation areas need consent or permission first.

Beyond planning

Building regulations, F-Gas and noise complaints

Planning decides where the outdoor unit may go. Other rules cover how it is wired, how the refrigerant is handled and what happens if a neighbour is disturbed later.

Electrics and Part P

A new circuit from your consumer unit is notifiable electrical work under Part P of the Building Regulations in England. A registered competent person can self-certify it, or it goes through building control. You should get an electrical certificate for the work.

F-Gas rules

Split units hold refrigerant, such as R32, which is a fluorinated gas. By law only F-Gas qualified engineers working for a certified company may install, commission or recover it. Ask to see the company certificate before you book.

Condensate drainage

In cooling mode the indoor unit makes water, and in heating mode the outdoor unit does too. The condensate drain needs a proper route to a gully, soil stack or soakaway, never a run down the wall or onto a path.

Noise complaints after fitting

Permitted development does not stop a complaint. A neighbour can report noise to the council’s environmental health team, which can act on a statutory noise nuisance. Passing the MCS 020(a) check at the planning stage is the best protection.

Across the UK

Planning rules in Wales, Scotland and Northern Ireland

Planning is devolved, so the rules above are for England only. We fit in London and the South East, but many readers are elsewhere, so here is what we could confirm.

Wales

Welsh Government guidance, updated in June 2026, now closely matches England. The compressor unit can be up to 1.5 cubic metres and must meet MCS 020(a). A detached home can have two units and other homes one.

Wales also bars cooling-only units, pitched roofs and listed buildings from permitted development. Conservation areas have the same rule about walls facing the road.

Scotland

Scotland has its own permitted development class for domestic heat pumps, Class 6H. It does not apply to listed buildings. In a conservation area, a unit must be at ground floor level on the rear wall.

Northern Ireland

We have not found clear official guidance on air conditioning units for homes in Northern Ireland. Ask your council before you buy.

Four-panel illustration of air conditioning planning rules for England, Wales, Scotland and Northern Ireland
Planning is devolved: Wales now matches England closely, Scotland has Class 6H, and in Northern Ireland ask your council.

Our process

How we check air conditioning planning permission

We never fit a unit and leave the planning question to you. These steps are part of every survey for our air conditioning installation service.

  1. Home type. We confirm if it is a house or flat, and if it is detached.
  2. Designations. We ask you to check listing, conservation area and article 4 status with your council.
  3. Position. We pick a spot for the outdoor unit away from walls facing the road.
  4. Size. We check the outdoor unit volume against the 1.5 or 0.6 cubic metre limit.
  5. Noise. We run the MCS 020(a) calculation for each neighbouring window or door.
  6. Paperwork. You get the result in writing with your fixed price.

If the planning position is unclear, we tell you before you pay anything. We can supply unit sizes, noise data and a site plan for your application.

Pipe runs also shape the planning answer. A longer pipe run lets us put the outdoor unit at the back, away from the street, but extra pipe costs more. Our air conditioning cost guide shows what is included.

A multi-split system also helps, since one outdoor unit can serve two to five rooms. That keeps you within the one unit limit on most houses.

To see a price for your rooms now, see your fixed price and we will book a survey.

Five-step illustration of planning checks before installing air conditioning: property type, unit size, MCS 020(a) noise check, position and written confirmation
Every survey includes these five planning checks before we fit.

FAQs

Planning permission questions

Is air conditioning permitted development in England?

Yes, in most cases, if the unit is an air source heat pump that is not used only for cooling. Since 29 May 2025, a house can have one outdoor unit up to 1.5 cubic metres, or two on a detached house. The unit must meet MCS 020(a) noise rules and must not sit above ground floor on a wall facing a road.

Does an air-to-air heat pump need planning permission?

Not usually on a house in England. An air-to-air heat pump that heats your home is covered by the Class G rights for air source heat pumps. It still has to meet the size, number, position and noise limits. A listed building, an article 4 direction or a flat can change the answer, so check with your council in those cases.

Can I put an air conditioning unit on the front of my house?

Only at ground floor level in most areas. On a wall that faces a road, a unit above the ground floor is not permitted development. In a conservation area, no unit can go on a wall or roof facing a road, or nearer the road than the house. The back or side of the home is usually the better place.

Do I need planning permission for air conditioning in a flat?

Often, yes. Permitted development allows only the first air source heat pump on a block of flats, with an outdoor unit of 0.6 cubic metres or less. If another flat already has one, yours will likely need an application. You will usually need the freeholder’s consent under your lease as well, so ask them early.

Can I install air conditioning in a listed building?

Possibly, but not without consent. Permitted development does not apply to listed buildings, so you need planning permission. Works that affect the building’s character also need listed building consent, and doing them without it is a criminal offence. A discreet spot at the rear, with pipes run through less sensitive parts of the building, helps your case.

How loud can an outdoor unit be without planning permission?

No more than 37.0 dB(A) at the assessment position, under MCS 020(a). That position is 1m outside the nearest door or window to a habitable room of each neighbouring home. The installer must use the unit’s normal sound figure, not quiet mode. Distance, walls and barriers all help bring the level down.

What happens if I fit air conditioning without permission when I needed it?

The council can ask you to apply for permission afterwards. If it refuses, it can take enforcement action, which may mean moving or removing the unit. Works to a listed building without consent are a criminal offence. A missing approval can also come up when you sell, so it is worth checking first.

Can my neighbour object to my air conditioning unit?

Only if you apply for planning permission. Neighbours can comment on an application, and the council weighs their view. If the unit is permitted development, there is nothing to object to. A neighbour can still complain about noise once it runs, and the council can act on a statutory nuisance, which is why the MCS 020(a) check matters.

How much does a planning application cost and how long does it take?

A householder application in England costs £548 from 1 April 2026, and a lawful development certificate for proposed work costs half the matching application fee. Councils aim to decide householder applications within 8 weeks. Fees rise each April with inflation, so check your council’s current schedule before you apply.

Should I get a lawful development certificate?

It is optional, but useful if you want proof. A lawful development certificate is a formal decision from your council that the work is permitted development. It is not required for a normal install on a house. Some owners apply when the position is borderline, or to have the paperwork ready for a future sale.

Get your fixed price

Tell us about your home and where you would like the outdoor unit. We will call you with a fixed price and tell you plainly if planning permission or other consent looks likely. No pressure and no obligation.

  • Reply within an hour
  • Free home survey
  • Price confirmed in writing

Prefer to chat? WhatsApp us on 07403 664179
Monday to Friday 8am to 6pm, Saturday 9am to 5pm

Aircova quick quote

We only use your details to prepare your quote. See our privacy policy.