Fixed prices Cooling and heating in one system

Home Air Conditioning Installation That Cools and Heats

Aircova handles air conditioning installation for homes across London and the South East, at a fixed price from £2,195 fitted. Most single rooms are done in a day by F-Gas certified engineers, and every system we fit also heats your home in winter.

  • F-Gas certified engineers
  • Prices include VAT
  • Most rooms fitted in one day

Prices last checked: October 2026

Air conditioning installation in a bright living room with the indoor unit above the patio doors
F-Gas certifiedQualified, registered engineers
Five leading brandsDaikin, Mitsubishi Electric, Fujitsu and more
Fixed pricesVAT included, confirmed in writing
Warranty registeredManufacturer terms confirmed in writing

See how it works

Air conditioning installation in three short clips

Cooling and heating in one system, a cool bedroom on the hottest nights, and one small hole in the wall. Each clip is nine seconds.

Aircova air conditioning unit cooling a home in summer and heating it in winter
One system, cools and heatsCools your home in summer and heats it in winter with the same unit.
Bedroom at night cooled by an Aircova air conditioning unit
Too hot to sleep?A cool bedroom all night, even in a top-floor flat or loft.
Cross-section showing air conditioning installation through one 65mm hole in the wall
One small hole, one dayA 65mm hole, two units, and most single rooms are done in a day.

Supply and fit

What does air conditioning installation include?

Air conditioning installation is the supply and fitting of an indoor unit, an outdoor unit and the pipework, cable and drain that join them, followed by a pressure test, vacuum and commissioning. Aircova fits a single room from £2,195 with VAT, usually in one day, by F-Gas certified engineers.

All of that sits inside one fixed price, along with the electrical connection and a full handover of the controls.

  • A free survey of your home before anything is booked
  • Indoor and outdoor units from Daikin, Mitsubishi Electric, Fujitsu, Toshiba or Panasonic
  • Up to 3 metres of insulated copper pipe, cable and condensate drain in neat white trunking
  • A wall bracket or ground stand for the outdoor unit
  • Electrical connection and safety testing
  • Nitrogen pressure test, vacuum and commissioning, with a written record
  • Warranty registration and a walk through the remote and phone app

Getting an air conditioning unit fitted properly takes more than a drill and a bracket, and a few things can add to the price: a pipe run longer than 3 metres, an outdoor unit that needs scaffolding or a tower to reach, or an old consumer unit that needs upgrading first. Our air conditioning installation cost guide explains each one with real figures, so nothing on your quote comes as a surprise.

The law matters here too. Air conditioning holds refrigerant gas, and anyone who installs or services it has to hold the right F gas qualification. You can read the government guidance on working with F gas for the detail. Every engineer on an Aircova job is certified, and we will give you their registration number before the day.

Where the indoor and outdoor units go

The indoor unit sits high on an outside wall, at least 15cm below the ceiling, so cool air can spread across the room rather than drop straight down. We keep it away from the bed headboard and from desks, because nobody wants a draught on their neck. The outdoor unit, sometimes called the condenser, needs open air around it and a solid wall or level ground. Back gardens, side returns and balconies work well.

Noise to neighbours matters, especially in terraced streets. A modern inverter outdoor unit runs at roughly 45 to 50dB, about the level of a quiet conversation, and we avoid placing it under a neighbour’s bedroom window. Water from the indoor unit runs away through a small drain pipe to a gully or downpipe, so you never empty a tank.

What we check before we quote

A fixed price is only fair if it is based on your actual home. At the survey we measure the room, note which way the windows face, check the wall type for drilling, and plan the shortest neat pipe route. We also look at your consumer unit, because older fuse boards sometimes need a spare way or an upgrade before a new circuit can be added. If anything will cost extra, you see it in writing before you agree to a date.

A new circuit from the consumer unit counts as notifiable electrical work under Part P of the Building Regulations in England. It has to be done by an electrician registered with a competent person scheme, or signed off by building control. We tell you at the survey how your job will be certified.

Outdoor air conditioning unit fitted on a wall bracket outside a house
Outdoor units go on a wall bracket or a ground stand, usually at the back or side of the house.

Fixed-price packages

Fixed prices for home air conditioning

A single room starts from £2,195 fitted, including VAT. Two rooms on one outdoor unit start from £3,995, and three rooms from £5,495. These cover a standard install, and we confirm your exact price in writing after the survey.

One room

One indoor unit and one outdoor unit for a bedroom, office or loft.

from£2,195

Fitted, VAT included

  • 2.5kW unit for rooms up to about 20m²
  • Up to 3m of pipework
  • Cooling, heating and dehumidifying
  • Wi-Fi control from your phone
Get this price
Lower cost per room

Two rooms

Two indoor units running from one outdoor unit, each with its own temperature.

from£3,995

Fitted, VAT included

  • Two indoor units, one outdoor unit
  • Separate control in each room
  • Usually fitted in two days
  • Wi-Fi control from your phone
Get this price

Three rooms

A whole floor kept comfortable from a single outdoor unit.

from£5,495

Fitted, VAT included

  • Three indoor units, one outdoor unit
  • Each room set to its own temperature
  • Usually fitted in two to three days
  • Wi-Fi control from your phone
Get this price

Prices include the units, up to 3 metres of pipework per indoor unit, electrical connection, commissioning and VAT. For larger rooms, brand upgrades and access costs, we explain every extra in plain figures before you book. You pay 50% when you book and the other 50% during installation.

System types

Choosing air conditioning for your house

The right air conditioning for a house depends on how many rooms you want to cool and how much building work you are happy with. Most homes choose between three systems, and all three cool in summer and heat in winter.

Home air conditioning systems compared
SystemBest forRooms per outdoor unitTypical fitting time
Wall-mounted splitOne bedroom, office or loft room11 day
Multi-splitTwo to five rooms in the same house2 to 52 to 3 days
DuctedWhole floors, renovations and new buildsWhole floor3 to 5 days

Wall-mounted split systems

Best for one room

For air conditioning for home use in one room, one indoor unit sits high on the wall, linked to one outdoor unit. It is the quickest and cheapest way to cool a single room, and the most popular choice in UK homes.

Multi-split systems

Best for two to five rooms

Up to five indoor units share one outdoor unit, so the outside of your home stays tidy. Each room has its own remote and temperature.

Ducted systems

Best for whole floors

The indoor unit hides in a loft or ceiling void and feeds slim grilles in each room, so nothing shows on the walls. It suits a renovation or loft conversion.

Not sure what size you need? A typical bedroom needs a 2.5kW unit, while a sunny lounge or open plan kitchen often needs 3.5kW to 5kW. Our BTU calculator works it out from your room size, windows and roof.

Efficiency ratings worth checking

Every unit we fit is an inverter model running on R32 refrigerant, which has a much lower global warming impact than the older R410A gas. Look for two numbers on the label, and higher is better for both.

SEER
Cooling efficiency. Most units we fit are rated A++.
SCOP
Heating efficiency. Around 4 on the Daikin, Mitsubishi Electric and Fujitsu wall units we install, which is where the 3 to 4 kW of heat per kW of electricity comes from.

Split system or portable unit?

A portable unit costs a few hundred pounds, but a fitted system costs far less to live with in a room you use every summer.

Portable unit
  • Hot air hose out of the window
  • Loud, as the compressor is in the room
  • Struggles in rooms above 25°C
  • Cooling only
Split system
  • Noisy part stays outside
  • Cools a room in minutes
  • Quiet enough for bedrooms
  • Heats in winter too
Wall-mounted unit that heats and cools a modern home office

Heating and cooling

One heat pump for summer and winter

Every split system we install is an air-to-air heat pump. In summer it pulls heat out of the room. In winter it runs in reverse, taking warmth from the outside air and moving it indoors, and modern units keep working well below freezing.

3 to 4kW of heat for every kW of electricity used
R32lower impact refrigerant than R410A
19dBquiet mode on some indoor units

Homes heated by storage heaters or panel heaters see the biggest drop in heating bills. A direct electric heater turns one unit of electricity into one unit of heat, while a heat pump turns it into three or four.

Since 21 July 2026, the Boiler Upgrade Scheme run by Ofgem includes a £2,500 grant for air-to-air heat pumps in England and Wales. Only an installer certified by MCS for air-to-air can claim it, and MCS had certified none when it last updated its list. Aircova does not hold MCS certification, so our prices never include the grant. Our page on the heat pump grant explains the rules.

Rooms we cool

Air conditioning for bedrooms, lofts and flats

The rooms that overheat first are usually the ones you sleep or work in. Each one has its own problems to solve, so we size and place the unit to suit the room.

Bedroom air conditioning unit fitted above a large window

Bedrooms

Night modes from around 19dB, a gentle airflow that never blows on the bed, and a room held at 18 to 20°C for better sleep.

Bedroom air conditioning
Loft conversion bedroom with a sloped ceiling that overheats in summer

Loft conversions

Lofts sit right under the roof and often run several degrees warmer than the floor below. We plan the pipe route before we quote.

Loft air conditioning
Riverside flat in London with floor to ceiling windows

Flats

Balcony and wall-mounted outdoor units, plus help with the details your freeholder or managing agent will ask for.

Air conditioning for flats

Home offices, garden rooms and conservatories need the same careful sizing. A garden office often only needs a small 2kW unit, while a south facing conservatory can gain so much heat through the glass that it needs 3.5kW or more, even in a modest space. We work this out at the survey rather than guessing.

Running a shop, salon or office? We also fit commercial air conditioning with maintenance contracts.

How it works

How our air conditioning installers work

Our air conditioning installers follow the same five steps on every home AC installation, from your first price to the handover. Most single rooms take one working day, and a two or three room system takes two to three days. You get a fixed price in writing before any date is booked.

  1. Instant price. Tell us about your rooms online and get a fixed price in about two minutes.
  2. Free survey. An engineer checks walls, pipe routes, the outdoor unit spot and your fuse board.
  3. Written quote. You get the final price, the unit models and the fitting date in writing.
  4. Fitting day. Our engineers protect your floors, drill a 65mm hole, mount both units and run the pipework.
  5. Handover. We test the system, show you the controls and register your warranty.

Most homes in England can add a single air conditioning unit without planning permission, as long as it does not change how the building looks from outside in a big way. The government’s note on air conditioning rules says to check with your council, and flats, listed buildings and conservation areas often need consent. We look at this during the survey, and our air conditioning planning permission guide covers the common cases.

Engineer fitting an indoor air conditioning unit during a home install
Air conditioning fitters mount the indoor unit level and seal the wall hole to stop draughts.

Typical London homes

Back bedroom in a Victorian terrace

The indoor unit goes on the rear wall, and the outdoor unit sits on a bracket over the side return or on a ground stand in the garden. Solid brick walls take a little longer to core drill, but the pipe run is short and a 2.5kW unit is usually done in a day. The main thing to plan is where the outdoor unit sits in relation to the neighbours.

Top floor flat with a balcony

Here the outdoor unit usually goes on the balcony floor on rubber feet, which keeps it reachable for servicing without ladders. The lease will normally ask for the freeholder’s written consent first, so we supply the unit spec sheet, noise figures and a marked up photo to send with your request. Once consent is in, the fitting itself is a one day job.

New loft conversion

Lofts are the hottest rooms in most houses. If the conversion is still being built, we can run the pipework inside the walls before the plasterboard goes up, which leaves nothing on show. In a finished loft we route the pipe neatly down the outside wall. A 3.5kW unit is common, because sloped ceilings and roof windows add a lot of summer heat.

Why Aircova

Why homeowners choose Aircova

Aircova is a domestic air conditioning installation company based in London. We work with F-Gas certified engineers, publish our prices, and fit units from five leading manufacturers.

How to choose an air conditioning installer

A good unit fitted badly will leak, freeze up or fail early. Whoever you choose, these are the checks that separate careful air conditioning installers from cheap ones.

  • A company F gas certificate and a named, certified engineer
  • Pipe joints flared or brazed under nitrogen, then pressure tested
  • A deep vacuum on the pipework before the refrigerant is released
  • A fixed written quote that lists the exact unit models
  • Warranty registered in your name, with the paperwork left behind

Air conditioning brands we fit

DaikinQuiet indoor units with strong heating output.Daikin air conditioning installation
Mitsubishi ElectricPremium build quality, popular for bedrooms and year round heating.Mitsubishi Electric installation
FujitsuReliable, efficient units that keep the price of a full house system down.Fujitsu installers
ToshibaSlim, stylish wall units such as the Haori, with fabric covers to match a room.
PanasonicEtherea units with built in air purification.

We also fit Samsung, LG and Hitachi on request, subject to availability.

Warranty and aftercare

We register the manufacturer warranty. The term depends on the brand and model and is confirmed in writing, and our warranty page explains how it works. If a fault is caused by our fitting, we put it right at no cost. Book an air conditioning service once a year, call us for fault diagnosis and repair on any brand, or ask us about replacing an old unit that still runs on R410A gas.

Areas we cover

We fit air conditioning across London and nearby counties, including Surrey, Kent, Essex and Hertfordshire. See our page on air conditioning in London for local details.

London jobs come with their own details, such as residents’ parking zones, narrow side returns and buildings with shared walls. We plan for these before the day, so the van is parked legally, the ladders fit, and the neighbours know what to expect. Any parking permit cost is shown on your quote rather than added later.

Aircova serves homes across London and the South East. Call or WhatsApp 07403 664179. Monday to Friday 8am to 6pm, Saturday 9am to 5pm.

FAQs

Home air conditioning installation FAQs

How much does air conditioning installation cost in the UK?

A single room usually costs between £1,500 and £3,000 fitted in the UK, and London prices sit at the higher end. At Aircova a one room system starts from £2,195, two rooms from £3,995 and three rooms from £5,495, all including VAT. Your final price depends on the unit size, the brand, the length of the pipe run and how easy it is to reach the spot for the outdoor unit.

How long does it take to install air conditioning in a house?

Most single room installs take one working day, often five to seven hours. A two or three room multi-split takes two to three days because each indoor unit needs its own pipe run back to the outdoor unit. Ducted systems take longer, as there is ceiling or loft work involved.

Do I need planning permission for air conditioning?

Often not. A single outdoor unit on a house in England usually counts as a small change, as long as it does not affect how the building looks in a big way. Flats, listed buildings and homes in conservation areas are different and may need consent. We check this at the survey, and we tell you in writing if consent is needed.

Can home air conditioning heat my house in winter?

Yes. A split system is an air-to-air heat pump, so it heats as well as cools. It gives out around 3 to 4 kW of heat for every kW of electricity, which makes it far cheaper to run than plug-in or panel heaters. It warms the rooms that have an indoor unit, but it does not heat radiators or hot water.

Is air conditioning worth it in the UK?

For most homes with a room that overheats every summer, yes. A split system also heats, giving 3 to 4 kW of heat for every kW of electricity, so it earns its place all year rather than for a few hot weeks. It is less worth it for a room that is only warm on a handful of days. A single room starts from £2,195 fitted with VAT.

Can I have air conditioning installed in a flat?

Usually, yes. Most flats need written consent from the freeholder or managing agent before an outdoor unit goes on the building. A balcony is often the best spot for it. We help with the drawings and noise details they ask for, and we book the fitting once consent is in.

Does air conditioning use a lot of electricity?

Less than most people expect. A 2.5kW unit cooling a bedroom costs about 7p an hour on a typical summer day, and about 15p in a heatwave, at the October 2026 price cap. Running it for eight hours a night through a hot summer costs tens of pounds, not hundreds. Our running costs guide has a full breakdown.

Do air conditioning fitters need to be certified?

Yes. In the UK, anyone who installs, services or repairs air conditioning that contains refrigerant must hold an F gas qualification, and the company must hold F gas certification. Using an uncertified fitter can void the manufacturer warranty and break the law. Every Aircova engineer is F-Gas certified, and you can ask for their number before the job.

Can air conditioning be installed in winter?

Yes, and it is often the best time to do it. Installers are less busy from October to March, so you can choose your date, and the system starts heating your home straight away. Summer slots in London tend to book up weeks ahead once the first heatwave arrives, so fitting in winter means it is ready before you need cooling.

Does air conditioning add value to a house?

It can help a sale, but no reliable UK figure shows how much, so treat any percentage you see with care. A neat, efficient system that also heats is a selling point in hot top floor flats and loft rooms. Keep the commissioning record, warranty papers, service history and any written consents, because buyers and surveyors ask for them.

Get your fixed price

Tell us about your rooms and we will call you with a fixed price for your home. No pressure and no obligation.

  • Reply within an hour
  • Free home survey
  • Price confirmed in writing

Prefer to talk? Call 07403 664179
Monday to Friday 8am to 6pm, Saturday 9am to 5pm

Aircova quick quote

We only use your details to prepare your quote. See our privacy policy.